VPN or Dial-Up Error code: [700-799]

VPN or Dial-Up Error code 700 - The expanded command in the device .INF file is too long.

VPN or Dial-Up Error code 701 - The device moved to a BPS rate not supported by the COM driver.

VPN or Dial-Up Error code 702 - Device response received when none expected.

VPN or Dial-Up Error code 703 - ERROR INTERACTIVE MODE

VPN or Dial-Up Error code 704 - ERROR BAD CALLBACK NUMBER

VPN or Dial-Up Error code 705 - ERROR INVALID AUTH STATE

VPN or Dial-Up Error code 706 - ERROR WRITING INITBPS

VPN or Dial-Up Error code 707 - X.25 diagnostic indication.

VPN or Dial-Up Error code 708 - The account has expired.

VPN or Dial-Up Error code 709 - Error changing password on domain.

VPN or Dial-Up Error code 710 - Serial overrun errors were detected while communicating with your modem.

VPN or Dial-Up Error code 711 - RasMan initialization failure. Check the event log.

VPN or Dial-Up Error code 712 - Biplex port is initializing. Wait a few seconds and redial.

VPN or Dial-Up Error code 713 - No active ISDN lines are available.

VPN or Dial-Up Error code 714 - Not enough ISDN channels are available to make the call.

VPN or Dial-Up Error code 715 - Too many errors occurred because of poor phone line quality.

VPN or Dial-Up Error code 716 - The Remote Access IP configuration is unusable.

VPN or Dial-Up Error code 717 - No IP addresses are available in the static pool of Remote Access IP addresses.

VPN or Dial-Up Error code 718 - PPP timeout.

VPN or Dial-Up Error code 719 - PPP terminated by remote machine.

VPN or Dial-Up Error code 720 - No PPP control protocols configured.

VPN or Dial-Up Error code 721 - Remote PPP peer is not responding.

VPN or Dial-Up Error code 722 - The PPP packet is invalid.

VPN or Dial-Up Error code 723 - The phone number, including prefix and suffix, is too long.

VPN or Dial-Up Error code 724 - The IPX protocol cannot dial-out on the port because the computer is an IPX router.

VPN or Dial-Up Error code 725 - The IPX protocol cannot dial-in on the port because the IPX router is not installed.

VPN or Dial-Up Error code 726 - The IPX protocol cannot be used for dial-out on more than one port at a time.

VPN or Dial-Up Error code 727 - Cannot access TCPCFG.DLL.

VPN or Dial-Up Error code 728 - Cannot find an IP adapter bound to Remote Access.

VPN or Dial-Up Error code 729 - SLIP cannot be used unless the IP protocol is installed.

VPN or Dial-Up Error code 730 - Computer registration is not complete.

VPN or Dial-Up Error code 731 - The protocol is not configured.

VPN or Dial-Up Error code 732 - The PPP negotiation is not converging.

VPN or Dial-Up Error code 733 - The PPP control protocol for this network protocol is not available on the server.

VPN or Dial-Up Error code 734 - The PPP link control protocol terminated..

VPN or Dial-Up Error code 735 - The requested address was rejected by the server..

VPN or Dial-Up Error code 736 - The remote computer terminated the control protocol.

VPN or Dial-Up Error code 737 - Loopback detected..

VPN or Dial-Up Error code 738 - The server did not assign an address.

VPN or Dial-Up Error code 739 - The remote server cannot use the Windows NT encrypted password.

VPN or Dial-Up Error code 740 - The TAPI devices configured for Remote Access failed to initialize or were not installed correctly.

VPN or Dial-Up Error code 741 - The local computer does not support encryption.

VPN or Dial-Up Error code 742 - The remote server does not support encryption.

VPN or Dial-Up Error code 743 - The remote server requires encryption.

VPN or Dial-Up Error code 744 - Cannot use the IPX net number assigned by the remote server. Check the event log.

VPN or Dial-Up Error code 745 - ERROR_INVALID_SMM

VPN or Dial-Up Error code 746 - ERROR_SMM_UNINITIALIZED

VPN or Dial-Up Error code 747 - ERROR_NO_MAC_FOR_PORT

VPN or Dial-Up Error code 748 - ERROR_SMM_TIMEOUT

VPN or Dial-Up Error code 749 - ERROR_BAD_PHONE_NUMBER

VPN or Dial-Up Error code 750 - ERROR_WRONG_MODULE

VPN or Dial-Up Error code 751 - The callback number contains an invalid character. Only the following 18 characters are allowed: 0 to 9, T, P, W, (, ), -, @, and space

VPN or Dial-Up Error code 752 - A syntax error was encountered while processing a script.

VPN or Dial-Up Error code 753 - The connection could not be disconnected because it was created by the multi-protocol router.

VPN or Dial-Up Error code 754 - The system could not find the multi-link bundle.

VPN or Dial-Up Error code 755 - The system cannot perform automated dial because this connection has a custom dialer specified.

VPN or Dial-Up Error code 756 - This connection is already being dialed.

VPN or Dial-Up Error code 757 - Remote Access Services could not be started automatically. Additional information is provided in the event log.

VPN or Dial-Up Error code 758 - Internet Connection Sharing is already enabled on the connection.

VPN or Dial-Up Error code 759 - An error occurred while the existing Internet Connection Sharing settings were being changed.

VPN or Dial-Up Error code 760 - An error occurred while routing capabilities were being enabled.

VPN or Dial-Up Error code 761 - An error occurred while Internet Connection Sharing was being enabled for the connection.

VPN or Dial-Up Error code 762 - An error occurred while the local network was being configured for sharing.

VPN or Dial-Up Error code 763 - Internet Connection Sharing cannot be enabled. There is more than one LAN connection other than the connection to be shared.

VPN or Dial-Up Error code 764 - No smart card reader is installed.

VPN or Dial-Up Error code 765 - Internet Connection Sharing cannot be enabled. A LAN connection is already configured with the IP address that is required for automatic IP addressing.

VPN or Dial-Up Error code 766 - A certificate could not be found. Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate.

VPN or Dial-Up Error code 767 - Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network has more than one IP address configured. Please reconfigure the LAN connection with a single IP address before enabling Internet Connection Sharing.

VPN or Dial-Up Error code 768 - The connection attempt failed because of failure to encrypt data.

VPN or Dial-Up Error code 769 - The specified destination is not reachable.

VPN or Dial-Up Error code 770 - The remote computer rejected the connection attempt.

VPN or Dial-Up Error code 771 - The connection attempt failed because the network is busy.

VPN or Dial-Up Error code 772 - The remote computer's network hardware is incompatible with the type of call requested.

VPN or Dial-Up Error code 773 - The connection attempt failed because the destination number has changed.

VPN or Dial-Up Error code 774 - The connection attempt failed because of a temporary failure. Try connecting again.

VPN or Dial-Up Error code 775 - The call was blocked by the remote computer.

VPN or Dial-Up Error code 776 - The call could not be connected because the remote computer has invoked the Do Not Disturb feature.

VPN or Dial-Up Error code 777 - The connection attempt failed because the modem (or other connecting device on the remote computer is out of order.

VPN or Dial-Up Error code 778 - It was not possible to verify the identity of the server.

VPN or Dial-Up Error code 779 - To dial out using this connection you must use a smart card.

VPN or Dial-Up Error code 780 - An attempted function is not valid for this connection.

VPN or Dial-Up Error code 781 - The connection requires a certificate, and no valid certificate was found. For further assistance, click More Info or search Help and Support Center for this error number.

VPN or Dial-Up Error code 782 - Internet Connection Sharing (ICS and Internet Connection Firewall (ICF cannot be enabled because Routing and Remote Access has been enabled on this computer. To enable ICS or ICF, first disable Routing and Remote Access. For more information about Routing and Remote Access, ICS, or ICF, see Help and Support.

VPN or Dial-Up Error code 783 - Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing.

VPN or Dial-Up Error code 784 - You cannot dial using this connection at logon time, because it is configured to use a user name different than the one on the smart card. If you want to use it at logon time, you must configure it to use the user name on the smart card.

VPN or Dial-Up Error code 785 - You cannot dial using this connection at logon time, because it is not configured to use a smart card. If you want to use it at logon time, you must edit the properties of this connection so that it uses a smart card.

VPN or Dial-Up Error code 786 - The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication.

VPN or Dial-Up Error code 787 - The L2TP connection attempt failed because the security layer could not authenticate the remote computer.

VPN or Dial-Up Error code 788 - The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer.

VPN or Dial-Up Error code 789 - The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.

VPN or Dial-Up Error code 790 - The L2TP connection attempt failed because certificate validation on the remote computer failed.

VPN or Dial-Up Error code 791 - The L2TP connection attempt failed because security policy for the connection was not found.

VPN or Dial-Up Error code 792 - The L2TP connection attempt failed because security negotiation timed out.

VPN or Dial-Up Error code 793 - The L2TP connection attempt failed because an error occurred while negotiating security.

VPN or Dial-Up Error code 794 - The Framed Protocol RADIUS attribute for this user is not PPP.

VPN or Dial-Up Error code 795 - The Tunnel Type RADIUS attribute for this user is not correct.

VPN or Dial-Up Error code 796 - The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed.

VPN or Dial-Up Error code 797 - A connection to the remote computer could not be established because the modem was not found or was busy. For further assistance, click More Info or search Help and Support Center for this error number.

VPN or Dial-Up Error code 798 - A certificate could not be found that can be used with this Extensible Authentication Protocol.

VPN or Dial-Up Error code 799 - Internet Connection Sharing (ICS cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Please ensure that no other client on the network is configured to use 192.168.0.1.